DigiClock - Digital Clock w/Mirrored Finish & Dual USB Charger

This modern alarm clock provides style and functionality by doubling as a dual USB charger and aesthetic bedside mirror. The Limitless DigiClock features a large digital display and has three adjustable brightness levels as well as a light sensor that adapts to the environment of the room. Program the Night Mode time to dim the brightness of the LED clock when it is time for bed. You can charge virtually any mobile device with two USB charging ports while saving space on your nightstand! The sleek, low-profile design of the DigiClock is suitable for any room and features a replaceable backup battery to ensure your alarm still goes off in the event of a power outage!

Features:

Aesthetic Alarm Clock

This fashionable digital alarm looks good on any nightstand, table, or shelf around the house! The large digital display, three adjustable brightness levels, and backup battery provides an alarm clock you can rely on.

Dual USB Charger

Conveniently charge two mobile devices through the dual USB charging ports. Compatible with phones, tablets, speakers, watches, and more!

Mirror Reflective Finish

The premium reflective mirror acts as a functional decor piece suitable for any room. Add an aesthetic touch that reduces clutter and adds a sense of style.

Light Sensitivity Function

Ready for bed? Program the Night Mode to dim the brightness of the LED clock to create a comfortable sleeping environment or manually adjust the brightness level until you’re comfortable!

What’s Included:

• (1) DigiClock

• (1) 36” Type-C to USB Cable
• (1) USB Wall Adapter
• (1) CR2016 Coin Battery
• (1) User Manual
• (1) Year Limited Warranty by Limitless Innovations
  
  

Technical Specifications:

• Type-C Input: 5V/3A | 9V/3A | 12V/2A 2x
• USB Output: 5V/1A
• Size: 6.22” x 3.07” x 0.51”
• Weight: 0.40 lb

Components:

1. Mirrored Digital Display
2. “AL” Alarm Indicator
3. 12-Hour PM Indicator
4. Light Sensor
5. Mode (M) Button
6. Plus (+) Button
7. Minus (-) Button 8. Snooze Button
8. Snooze Button
   
9. Keyhole
10. Backup Battery Slot
11. Removable Base
12. USB Output 1
13. USB Output 2
14. Type-C Input

How to Use:

Setting Up the DigiClock

Set up the DigiClock

1. Install the Removable Base on the bottom of the DigiClock. The rounded edge should face the same direction as the Digital Display.
2. Hang the DigiClock using a screw or nail (not included) and the Keyhole on the back of the clock.
3. Plug the Type-C to USB Cable into the USB Wall Adapter and into the Type-C Input. The Digital Display will turn on and beep when ready to begin set up. The Digital Display will read “0:00”. 

Time Setting Sequence: 24-Hour/12-Hour | Hours | Minutes

1. Press and hold the Mode Button (M) for 2-3 seconds to enter the time setting mode. The Digital Display will read “24 Hr”.
2. Click the Plus (+) or Minus (-) Button to switch between the 24-Hour time setting and the 12-Hour time setting.
   NOTE: The 12-Hour PM Indicator will only show up when in the 12-Hour time setting is being used and when the clock is set to a time in the afternoon.
3. Click the Mode Button (M) to move to the hour segment. The hour segment will flash on the Digital Display.
4. Click the Plus (+) or Minus (-) Buttons to increase the hour value by 1 or press and hold the Plus (+) or Minus (-) Buttons to quickly increase/decrease the values by 8 steps per second.
5. Click the Mode Button (M) to move to the minute segment. The minute segment will flash on the Digital Display.
6. Click the Plus (+) or Minus (-) Buttons to increase the minute value by 1 or press and hold the Plus (+) or Minus (-) Buttons to quickly increase/decrease the minute value by 8 steps per second.
7. Click the Mode Button (M) to complete the time setting mode.

Setting & Using the Alarm:

1. Press the Minus (-) Button to turn the Alarm on/off. You will see the “AL” Alarm Indicator on the Digital Display when the Alarm is enabled.
2. With the “AL” Alarm Indicator turned on, single click the Mode Button (M) to view the current alarm time setting.
3. Press and hold the Mode Button (M) for 2 seconds to enter the alarm time setting mode. Time Setting Sequence: Hours | Minutes | Snooze Duration
4. The hour segment will flash on the Digital Display.
5. Click the Plus (+) or Minus (-) Buttons to increase the hour value by 1 or press and hold the Plus (+) or Minus (-) Buttons to quickly increase/decrease the values by 8 steps per second.
6. Click the Mode Button (M) to move to the minute segment. The minute segment will flash on the Digital Display.
7. Click the Plus (+) or Minus (-) Buttons to increase the minute value by 1 or press and hold the Plus (+) or Minus (-) Buttons to quickly increase/decrease the minute value by 8 steps per second.
8. Click the Mode Button (M) to move to the Snooze duration setting. The minute segment will flash on the Digital Display. You can set the Snooze duration between 5 and 60 minutes.
9. Click the Plus (+) or Minus (-) Buttons to increase the Snooze duration by 1 or press and hold the Plus (+) or Minus (-) Buttons to quickly increase/decrease the Snooze duration by 8 steps per second.
10. Click the Mode Button (M) to complete the alarm time setting mode.

Turning Off the Alarm:

The alarm will ring for 2 minutes before the automatic shut-off triggers.

1. Click one of the Mode (M), Plus (+), or Minus (-) Buttons to turn of the alarm.
2. Tap the Snooze Button to enter Snooze mode. The “AL” Alarm Indicator will blink while in Snooze mode. The Snooze mode will last for the duration of time that was set in steps 13-14 of “Setting & Using the Alarm”.
   NOTE: To turn off the Snooze mode before the time duration has elapsed, click the Mode (M), Plus (+), or Minus (-) Button. The Snooze mode will disable, and the “AL” Alarm Indicator will stop blinking.

Adjusting the Brightness:

The default is set to the maximum brightness level. To adjust the brightness, press the Plus (+) Button to scan through the brightness modes.

Brightness Levels: Bright | Medium | Dark

Light Sensitivity Function:

There is a built-in light sensor that can automatically adjust the brightness of the Digital Display based on the environment. Press and hold the + button to turn this feature on/off.

Night Mode:

This feature will automatically adjust the Digital Display to the Dark brightness mode during the programmed time.

1. Double click the Mode (M) Button to enter the Night Mode selection.
2. Press the Plus (+) or Minus (-) Button to turn the Night Mode on/off.
3. With Night Mode turned on (the Digital Display should read “ON”), press and hold the Mode (M) Button to enter the Night Mode time setting.
4. Set the Dark Mode start time by clicking the Plus (+) or Minus (-) Buttons to increase the hour value by 1 or press and hold the Plus (+) or Minus (-) Buttons to quickly increase/decrease the values by 8 steps per second.
5. Click the Mode (M) Button to move to the minute segment. The minute segment will flash on the Digital Display.
6. Click the Plus (+) or Minus (-) Buttons to increase the minute value by 1 or press and hold the Plus (+) or Minus (-) Buttons to quickly increase/decrease the minute value by 8 steps per second.
7. Click the Mode (M) Button to begin entering the Dark Mode end time.
8. Click the Plus (+) or Minus (-) Buttons to increase the hour value by 1 or press and hold the Plus (+) or Minus (-) Buttons to quickly increase/decrease the values by 8 steps per second.
9. Click the Mode (M) Button to move to the minute segment. The minute segment will flash on the Digital Display.
10. Click the Plus (+) or Minus (-) Buttons to increase the minute value by 1 or press and hold the Plus (+) or Minus (-) Buttons to quickly increase/decrease the minute value by 8 steps per second.
11. Click the Mode (M) Button to complete the Dark Mode time setting.

Charging a Mobile Device:

Plug a USB cable into one of the USB-A Outputs & into a device. The device will begin to charge.

Backup Battery:

The CR2016 Coin Battery is pre-installed in the Backup Battery Slot to enable the alarm- save in case of a power outage.

Safety

• Do NOT use the DigiClock near a magnetic or electric field.
• Do NOT use the DigiClock in direct sunlight or extreme heat for extended periods of time.
• Do NOT subject the DigiClock to harsh chemicals.
• Do NOT submerge the DigiClock or its accessories in water.
• Do NOT store the DigiClock where temperatures will exceed 140° F (60° C).
• Do NOT charge the DigiClock in high humidity conditions.
• Do NOT attempt to replace the battery as it is a non-serviceable part.
• Do NOT attempt to disassemble, repair, or open the DigiClock or its accessories in any way.
• Do NOT paint or apply coatings to the DigiClock as you might affect moving parts or damage internal components.
• Do NOT leave the DigiClock plugged in for extended periods of time. Doing so may decrease the life of the battery life.
• Batteries should be recycled or disposed of, as per state and local guidelines.